300/400/500mm motor lead screw for your option, with T8 screw and 1m cable.
Uniform speed: high inner hole accuracy, stable and accurate speed in the working process without losing step.
Stable structure: the motor rotor surface is coated with imported epoxy resin, the rotor is sealed as a whole, and cured at high temperature. The rotor is not easy to process residues such as iron pin after processing the outer circle.
Stable speed: the motor has high overall stability, even speed and low noise.
Lead Screw: 300/400/500mm(optional)
Phase Number: 2
Step Angle: 1.8°±0.09°
Rated Voltage: DC 3.6V
Rated Current: DC 1.5A/phase
Phase Resistance(20°): 2.4*(1±15%)Ω/phase
Phase Inductance(1KHz): 3.7*(1±20%)mH/phase
Holding Torque: ≥420mN.m
Detend Torque: 15mN.m REF.
Turn(axial reach): (A-AB-B-clockwise)
Insulation Resistance: ≥100MΩ（DC 500v）
Electrical Strength: AC600V/1mA/1S
Rotor: 122.3 g.cm²
Mass: 331 g REF.
Item Weight: 388g / 13.7oz(300mm); 418g / 14.7oz(400mm); 450g / 15.9oz(500mm)
1 * Stepper Motor
1 * Wire(1m)