Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper.
Tone identification, Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber.
Indicate the signal directions and power in fiber.
Indicate the signal presence or absence(Live or dark fiber).
Low battery monitoring function, when battery power is insufficient, the Low battery LED will remindusers to change batteries.
Wave respond: 800nm-1700nm
Pass through insertion loss:
1. 250umOptical fiber 1. 1.0dB
2. 900umOptical fiber 2. 1.0dB
3. 3 mm Optical fiber 3. 2.0dB
Application of optical fiber: 250um/900um/2.5um/3mm Optical fiber
Identified Signal Type: 270HZ/1KHZ/2KHZ
Identification of modulated signals: Yes
Power Measurement: Yes
Display: LED segment
Low power monitoring: Yes
Detector type: 1mm InGaAs
Minimum detection power
Test conditions: 1550
250um Optical fiber -35dBm
900um Optical fiber -35dBm
3 mm Optical fiber -30dBm
Test conditions: 1310
250um Optical fiber -30dBm
900um Optical fiber -30dBm
3 mm Optical fiber -25dBm
Power supplies: 2 * AA 1.5V ALR6 Battery (not included)
Size: 228 * 45 * 40mm / 9.0 * 1.8 * 1.6in
Weight: 200g / 7.1ounce
Package size: 250 * 80 * 53mm / 9.8 * 3.1 * 2.0in
Packge weight: 350g / 12.3ounce
1 * Optic Fiber Identifier